Whether you have renovated your kitchen or built a new home from scratch, post construction clean up is one of the crucial tasks to dislodge concrete grime, masonry fragments, sharp screws, dust, paint splatters and metal waste from the site.
A proper clean-up section after completing a construction project can prevent potential injuries, slips, falls and dust allergies. However, the process requires absolute devotion and a proper checklist, covering every nook and cranny, including walls, windows, flooring, etc. In order to create a safe, sound and harmonious space, consider the following post construction cleaning guide for efficient eradication of hazardous waste.
Ensure you rigorously follow safety guidelines when sprucing up unstable surfaces and difficult to reach spots in the property. This easy to follow guide will streamline the process while helping you achieve spotless results using natural cleaning products.
Let’s Get Started!
- Stock Up On Essential Cleaning Supplies
- Dislodge Large Construction Debris
- Remove Fine Dust From All Spots
- Use a HEPA Filtered Vacuum For Embedded Gunk
- Eliminate Stubborn Stains From Walls
- Pay Attention to High Traffic Areas
- Thoroughly Wash Windows Inside & Outside
- Kitchen and Bathroom Cleaning
- Deep Clean Your Exterior Area
- Wrapping Up
1. Stock Up On Essential Cleaning Supplies
Save time and energy by arranging necessary cleaning supplies before getting into the process. Highly trained cleaners also come equipped with essential tools and products for the best end of lease cleaning Sydney services. You’ll need:
- Microfiber cloths and telescopic dusters
- Trash bags to dispose of construction waste
- Brooms and dustpan
- Vacuum cleaner with a brush attachment
- A pressure washing machine
- Assorted brushes (an old toothbrush and putty knife)
- Microfiber mops
- Sponge
- Natural cleaning products: White vinegar, lemon, baking soda, hot water, castile soap, hydrogen peroxide, rubbing alcohol, dishwashing soap and essential oil(s).
- Hot water and a bucket
2. Dislodge Large Construction Debris
Focus on preventing accidents and injuries by clearing metal waste and large construction waste from the site. It is good to walk through all your rooms, and inspect interior and exterior parts to get rid of loose nails, screws, wood blocks, metal blocks, plastic traps, bolts and heavy chunks of construction debris.
Tip: Put on shoes, rubber gloves and other protective gear to prevent physical injuries or bruises.
3. Remove Fine Dust From All Spots
Construction dust particles tend to settle on hard surfaces, between door tracks, walls, crown mouldings, baseboards, and shelf tops, polluting indoor air. If not treated properly, this can even trigger allergies and respiratory problems.
It is good to start the process by dusting your ceiling fans, walls, light fixtures, fittings, shelves, kitchen counters, windows, door tracks, baseboards, cabinets and other nooks and crannies. A damp microfiber cloth with an extendable handle can simplify the dusting process post construction.
Tip: Use white vinegar spray to remove grime and gunk from light bulbs and fixtures.
4. Use a HEPA Filtered Vacuum For Embedded Gunk
Ensure you use a heavy duty vacuum cleaner with the right brush attachment to remove embedded dust and allergens from carpets, floors and other crannies. Run a machine to remove construction waste from window blinds, under heavy furniture, rugs, carpets and sliding door tracks. This can save you a lot of time and energy while maintaining a healthy indoor environment.
5. Eliminate Stubborn Stains From Walls
Believe it or not! Cleaning walls and baseboards post construction is pivotal. Ensure you get rid of stubborn adhesive stains and paint marks from these surfaces without causing any damage. You can either use castile soap solution or a magic eraser to clean your painted walls and baseboards. Avoid using harsh chemicals or sharp tools to prevent scratching or other damage.
6. Pay Attention to High Traffic Areas
It’s obligatory to deep clean high traffic areas, such as lobbies, entrances and corridors when sprucing up your home post construction. These areas tend to accumulate more dirt as construction workers use these spaces to store tools, raw materials, and equipment.
So, follow a proper strategy to banish lingering germs, bacteria and stains from the high traffic zones. Ensure you dust and mop the entrance gates and disinfect door knobs using rubbing alcohol. Also, clean and disinfect glass doors, mirrors and walls to achieve a spotless look. According to seasoned end of lease cleaning Sydney experts, leave the rubbing alcohol on the dirt laden areas for a few minutes before wiping it down for effective results.
7. Thoroughly Wash Windows Inside & Outside
Window screens and frames experience a lot of wear and tear from paint splatters, dust particles, and other stains during renovation, leaving the glass surface dull and dingy. Start the process by removing loose dirt and grime from sills, panes, and frames using a dry microfiber cloth.
Next, spray a natural window cleaner (white vinegar, dishwashing soap, and warm water) on the surface and wipe down with a sponge. Gently scrub the stains. Use an old toothbrush for tracks and tight spaces. Lastly, run a rubber squeegee to achieve streak-free results.
Tip: Clean your windows outside if accessible, or hire professionals to prevent injuries.
8. Kitchen and Bathroom Cleaning
Make sure you deep clean these two areas of your home after the construction work. Always start from the top, like exhaust fans and dust cabinet doors. Scrub walls and tiles gently. Scour and cleanse countertops and backsplashes. Ensure you clean appliances inside and outside using eco-friendly products.
When cleaning bathroom surfaces, use vinegar spray for showerhead, faucets, glass doors, and sinks. Use baking soda paste for bathtub, tiles and grout lines. Hydrogen peroxide can also do wonders in dislodging construction gunk and grime.
9. Deep Clean Your Exterior Area
Remove dust and grime residue from your exterior areas, including walkways and concrete surfaces outside your property. You can use the most effective pressure washing technique to dislodge construction grime and stains, including paint marks. Don’t forget to sweep patios, porches and decks when sprucing up the exterior post construction.
Tip: End of lease cleaning Sydney experts recommend proper disposal of construction waste, hazardous chemicals, leftover paint and trash to reduce greenhouse gas emissions.
How to Deep Clean Your Home Post Construction?
Wrapping Up
These are some of the best tips and tricks help you remove construction waste, dust, debris and stubborn stains from the entire space in a streamlined manner. It will help you enjoy a newly constructed and beautiful abode, promoting positivity, harmony and hygiene.